Nitrogen generation by Pressure Swing Adsorption (PSA)
The Nitrogen generation plant based on the PSA-process (fig. 1) consist of two adsorption towers filled with carbon molecular sieve. Compressed and purified air is passing the adsorption towers. Mainly Oxygen is adsorbed on the carbon molecular sieve and Nitrogen enriched gas is leaving the tower. The Oxygen concentration can be reduced to client‚?Ts required purity levels. During adsorption in one tower the second tower is totally regenerated just by depressurization to ambient pressure. The Oxygen enriched off gas with 30-35 vol.-% Oxygen content is vented to the outside atmosphere. After about one minute adsorption in one adsorption tower the process controller is switching over to the second tower and the first one is regenerated.
Here‚?Ts How It Works - Membrane
Atmospheric air contains essentially 78% nitrogen and 21% oxygen. Ordinary dry compressed air is filtered and passed through a technically advanced bundle of hollow membrane fibers where nitrogen is separated from the feed air by selective permeation. Water vapor and oxygen rapidly permeate safely to the atmosphere, while the nitrogen gas is discharged under pressure into the distribution system. Pressure, flow rate and membrane size/quantity are the main variables that affect nitrogen production. Nitrogen purity (oxygen content) is controlled by throttling the outlet from the membrane bundle(s). At a given pressure and membrane size, increasing the nitrogen flow allows more oxygen to remain in the gas stream, lowering nitrogen purity. Conversely, decreasing nitrogen flow increases purity. For a particular purity, higher air pressure to the membrane gives a higher nitrogen flow rate. Purity ranges of less than 90% to 99.999% are possible. By combining multiple membrane bundles, an infinite number of flow/purity ranges are available to satisfy practically any application that requires nitrogen gas.